150W LED Flood Light
Product Details:
- Shape Square
- Product Type 150W LED Flood Light
- Material Metal
- Input Voltage 90 TO 300 Volt (V)
- Working Temperature -20 TO 50 Celsius (oC)
- Application Industrial
- Size Different Size
- Click to View more
X
150W LED Flood Light Price And Quantity
- 10 Unit
150W LED Flood Light Product Specifications
- -20 TO 50 Celsius (oC)
- Metal
- 150W LED Flood Light
- White
- Industrial
- Different Size
- 90 TO 300 Volt (V)
- Square
150W LED Flood Light Trade Information
- 500 Unit Per Month
- Days
- All India
Product Description
STANDARDS
| LED Luminaire conformity to IS:10322/Part 5/Section 5/2012 latest and IS: 16107 (Part 2/Sec 1):2012 latest | Yes |
| Photo biological safety of LEDs used shall be as per IS:16108/2012 (exempt group) | Yes |
| Types of LED Luminaire as per the IS: 16107(Part-2/ Sec.-1)/2012 | Type B |
| Types of LED Modules as per the IS: 16103(Part-2)/2012 | Type 3 |
| LED Rating/System Wattage/Rated Power | 150W |
| Luminaire System Efficacy (Lumen/watt) | >/= 100 Lm/Watt |
| Ingress Protection (IP Rating) as per IS:10322 (Part 1):1982 latest | IP66 |
| Mounting brackets (included) | Adjustable |
| Warranty for free replacement (in Years) | 2 |
ELECTRICAL EFFICIENCY
| Input operating Voltage range and frequency | 90 to 300 V olts AC at 50 Hz+/-2 Hz |
| Automatic Higher Cut off voltage above 300 volt | Yes |
| Rated voltage | 230 V AC 50 Hz |
| AC Power Factor at full load | ï 0.95 |
| Driver Efficiency (in %age) | ï85 |
| Total Harmonics Distortion (in %age) | ï 10 |
| "The total circuit power shall not be more than 110 percent of the value declared by the manufacturer" | Yes |
OPTICAL
| LED chip Efficacy | ï130 Lm/Watt |
| Colour temperature (+/-500K) | 3000K, 4000K, 5000K, 6000K |
| Working life for LED (Minimum 50,000 burning hours as per LM-80 report) | Yes |
| Colour Rendering Index(CRI) | ï75 |
| Beam Angle | ï120 |
| Optic lense materal (UV stabilised) (Write NA for without optic lense supply) | Poly carbonate lense |
THERMAL MANAGEMENT
| Heat sink should be die-cast aluminium along with sufficient heat sink fins to dissipate heat effectively | Yes |
| Capacitor shall be rated for a temperature of 105 deg. celsius or better | Yes |
| Junction temperature | < 85 degC |
| Operating temperature range | -20 deg C to +50 deg C |
| Operating Humidity Range | 10 % to 95% RH |
PROTECTION
| Short circuit Protection | Yes |
| Over load protecton | Yes |
| Over Voltage protection | Yes |
| Reverse polarity | Yes |
| High voltage test (1.5 KV for one minute between supply terminals and body of the unit) | Yes |
| Insulation resistance between earth and current carrying part | >2M ohm |
| The luminaire shall be protected against surges and transients ( Internal) | >/=5KV |
| The luminaire shall be protected against surges and transients of >/=10KV (External) | Yes |
CONSTRUCTIONAL
| The Luminaires casing/housing (single piece housing) shall be pressure die casted aluminium alloy with higher thermal conductivity | Yes |
| The luminaire body must be corrosion resistant epoxy powder coated | Yes |
| All fastners must be of stainless steel | Yes |
| The entire housing (both LED section and driver section) shall be dust and water proof having IP 66 protection as per IS:10322 (Part 1):1982 latest | Yes |
| Extruded silicon loop gasket shall be provided in the lantern body to ensure a weather proof seal between the UV Glass cover and the metal housing to exclude the entry of the dust, water, insects etc., | Yes |
| Luminaries light transparency should be of Toughened glass | Yes |
| Toughned transparent glass cover thickness | >/=4 mm |
| Toughned Glass shall not get discoloured shall not suffer degration due to heat and ageing within warranty period | Yes |
| Number of electronic control gear (power supplies) | 2 Nos. |
| Driver components shall be industrial grade or above | Yes |
| PCB shall be FR4 grade minimum 0.8 to 1.0 mm thick or more | Yes |
| The Luminaires works on single phase three wires system (Phase, Neutral and Earth) | Yes |
| Suitable connector shall be provided for LED connection between driver output and LED | Yes |
| Length of ISI marked three core wire (shall be provided along with supply of material) | 50 cm |
| Light Source | SMD LED Chip as per LM 80/IS16106 |
MARKING
| "Manufactures Name and and brand on the aluminium die cast body | Engraved/Embossed |
| Manufacturerïs name, model number, serial number | Yes |
| Date of manufacture (month-year), and lot number as identification mark inside each unit and the outside of each packaging box | Yes |
| The operation characteristics voltage and power be marked inside of each LED luminaire unit | Yes |
REPORTS AND CERTIFICATIONS
| LED Make | OSRAM / NICHIA/CREE / SAMSUNG / SEOUL / LUMILED / PHILIPS / EDISON / SYSKA / LUMENMAX / EVERLIGHT / BRIDGELUX / NATIONSTAR / REFOND |
| System must have EMI/EMC compliance as applicable (Test reports shall be furnish on demand by buyer/consignee) | Yes |
| LM 79 (Photometry) (Ref.IS:16106:2012) report from Central Government lab/NABL/ILAC accrediated lab. Reports shall be furnish on demany by buyer (LM-79 report shall have total lumen output, power, PF, Current in Amps, CRI & CCT etc.,) | Yes |
| LM 80 & TM 21 (Part of LM 80) (Ref. IS:16105:2012) Reports and Photo biological report for LED report from Central Government lab /NABL/ILAC accrediated lab. Reports shall be furnish on demany by buyer (LM-80 report shall haveand the Pohoto Biological report of the LED Chip being used in the luminaire) | Yes |
| Availability of test Report from Central Government lab/NABL/ILAC accrediated lab to Indian Standrad IS:10322/part 5/sec-5/2012 and IS 16107 (Part 2/Sec 1) : 2012 | Yes |
| Seller has to furnish Type test report on demand by buyer/consignee | Yes |
| DC or AC supplied electronic control gear for LED Module shall comlpy as per IS:15885 (Part 2/Sec.13) | Yes |
| LED Luminaire for Flood Light shall comply with Complusory Registration(CRS) of BIS for safety as per IS 10322 (Part 5/Section 5): 2012 as applicable on the date | Yes |
Enter Buying Requirement Details
Other Products in 'LED Flood Light' category
Contact Details
- Plot No. - 13, 3rd Floor, Central Avenue, Near Punjab & Sind Bank, Nagpur - 440018, Maharashtra, India
- Phone : 08037802573
PHOENIX LUMINARIES PVT. LTD.
GST : 27AAGCP6889H1ZQ
GST : 27AAGCP6889H1ZQ
- Mr Narayan (Director)
- Mobile : 08037802573
- Send Inquiry
Send Inquiry
PHOENIX LUMINARIES PVT. LTD.
All Rights Reserved.(Terms of Use)
Developed and Managed by Infocom Network Private Limited.
Developed and Managed by Infocom Network Private Limited.
